Course History

Please note that the information shown below is for an obsolete version of the course. Please select the 'Next Version' button to view more relevant data

Previous Version Version Effective: 1st of December, 2022 Next Version
Version Effective: 1st of December, 2022

CPC33020 - Certificate III in Bricklaying and Blocklaying

Course Details

Course Summary

This qualification reflects the trade qualified role of a bricklayer, blocklayer or paver who may have responsibility for undertaking heritage bricklaying, refractory bricklaying, bricklaying, blocklaying and paving work in residential, industrial and commercial contexts, in both existing and new constructions.


Entry Requirements

Completion of the bksb (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher level course.

There are no other specific entry requirements for this qualification, however a strong grasp of basic Mathematics is very beneficial to grasping the Course content.

 

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.


VET Student Loan Information

VET Student Loans may be available for eligible students in approved Diploma level qualifications. The loan can be used towards Tuition Fees only and does not cover additional expenses such as textbooks, uniforms, equipment, travel, tools, and accommodation or general living expenses. Loan limits or caps may apply for some eligible courses and where a loan limit is reached for a course, students may be required to pay upfront for any remaining units.

For more information or to check your eligibility for a VET Student Loan, please visit our VET Student Loans webpage or contact us .


Course Details

Course Type Qualification
Student Availability
  • Domestic
Fees
Full Fee $22,596.00 (2024)
$23,352.00 (2025)
Fee for service per unit $807.00 (2024)
$834.00 (2025)
RPL Fee for service per Unit $404.00 (2024)
$626.00 (2025)
For detailed information on Course Fees, visit www.cqu.edu.au/fees
Application Mode
  • Direct To University
How to Apply Please Enquire
Study Area
  • Apprenticeships, Trades & Training
Skill Area
  • Building and Construction
AQF Level Level 3: Certificate III

Admission Codes

Domestic Students
Tertiary Admission Centre Codes (TAC) Codes
Not Applicable
International Students
CRICOS Codes
Not Applicable

Student Outcomes, Career Opportunities and Occupations

Occupational titles could include:

  • Bricklayer
  • Blocklayer
  • Paver.

Course Structures

In order to complete this course, you must:

  1. Complete 20 core units
  2. Complete 8 elective units

Study Mode Definitions

  • Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
  • On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
  • Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.

*All study modes may include Vocational placement and/or work integrated learning.

Select a course structure below to view the delivery details, including the different study modes offered for each structure.

Standard Course Structure

The nominal duration of the bricklaying apprenticeship is considered to be 48 months, however the expected duration is 42 months.

To achieve a reasonable rate of progression and completion within the expected duration (42 months) it is anticipated an apprentice would achieve 25% of all competencies required for the qualification within every 10.5 month period of the apprenticeship.

Ultimately the rate of progression of an apprentice will depend largely on the following factors:

1. Time spent by the apprentice being trained on-site in actual bricklaying tasks (i.e., not just labouring)

2. Employers range of work

3. Apprentice (individual) natural ability learning/mastering the skills required

To a lesser extent the time spent completing face-2-face training in an off-site simulated environment will also be relevant – but this is mainly related to learning practical skills and building knowledge regarding construction techniques that the apprentice is not readily exposed to on-site. For example, masonry arches are rarely used in modern building design, and therefore construction techniques and related skills will be developed and taught pre-dominantly during off-site, face-2-face training.

 

 

  • Mixed Mode
Core
CPCCCA3002 Carry out setting out More Information Training.gov Details
CPCCOM1012 Work effectively and sustainably in the construction industry More Information Training.gov Details
CPCCOM1013 Plan and organise work More Information Training.gov Details
CPCCOM1014 Conduct workplace communication More Information Training.gov Details
CPCCOM1015 Carry out measurements and calculations More Information Training.gov Details
CPCCOM2001 Read and interpret plans and specifications More Information Training.gov Details
CPCCCM2006 Apply basic levelling procedures More Information Training.gov Details
CPCCCM2008 Erect and dismantle restricted height scaffolding More Information Training.gov Details
CPCCCM2012 Work safely at heights More Information Training.gov Details
CPCCBL3005 Lay masonry walls and corners More Information Training.gov Details
CPCCBL3002 Carry out masonry veneer construction More Information Training.gov Details
CPCCBL3003 Carry out cavity brick construction More Information Training.gov Details
CPCCBL2001 Handle and prepare bricklaying and blocklaying materials More Information Training.gov Details
CPCCBL2002 Use bricklaying and blocklaying tools and equipment More Information Training.gov Details
CPCCBL3009 Install flashings and damp proof course More Information Training.gov Details
CPCCBL3006 Lay multi-thickness walls and piers More Information Training.gov Details
CPCCBL3010 Construct masonry arches More Information Training.gov Details
CPCCBL3011 Construct curved walls More Information Training.gov Details
CPCCBL3013 Construct masonry structural systems More Information Training.gov Details
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry More Information Training.gov Details
Elective
CPCCBL3014 Install fire-rated masonry construction More Information Training.gov Details
CPCCBL3001 Lay paving More Information Training.gov Details
CPCCCM2007 Use explosive power tools More Information Training.gov Details
CPCCBL3004 Construct masonry steps and stairs More Information Training.gov Details
CPCCBL3012 Construct fireplaces and chimneys More Information Training.gov Details
CPCCBL3015 Construct decorative brickwork More Information Training.gov Details
CPCCCO2013 Carry out concreting to simple forms More Information Training.gov Details
CPCCSF2004 Place and fix reinforcement materials More Information Training.gov Details
CPCCCM2009 Carry out basic demolition More Information Training.gov Details

Unit Sequence

For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
Unit Code Unit Name
CPCCCA3002 Carry out setting out
CPCCOM1012 Work effectively and sustainably in the construction industry
CPCCOM1013 Plan and organise work
CPCCOM1014 Conduct workplace communication
CPCCOM1015 Carry out measurements and calculations
CPCCOM2001 Read and interpret plans and specifications
CPCCCM2006 Apply basic levelling procedures
CPCCCM2008 Erect and dismantle restricted height scaffolding
CPCCCM2012 Work safely at heights
CPCCBL3005 Lay masonry walls and corners
CPCCBL3002 Carry out masonry veneer construction
CPCCBL3003 Carry out cavity brick construction
CPCCBL2001 Handle and prepare bricklaying and blocklaying materials
CPCCBL2002 Use bricklaying and blocklaying tools and equipment
CPCCBL3009 Install flashings and damp proof course
CPCCBL3006 Lay multi-thickness walls and piers
CPCCBL3010 Construct masonry arches
CPCCBL3011 Construct curved walls
CPCCBL3013 Construct masonry structural systems
CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
CPCCBL3014 Install fire-rated masonry construction
CPCCBL3001 Lay paving
CPCCCM2007 Use explosive power tools
CPCCBL3004 Construct masonry steps and stairs
CPCCBL3012 Construct fireplaces and chimneys
CPCCBL3015 Construct decorative brickwork
CPCCCO2013 Carry out concreting to simple forms
CPCCSF2004 Place and fix reinforcement materials
CPCCCM2009 Carry out basic demolition

Course Assessment Information

RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Assessment Types
Third Party Verification
Written/Electronic Assessment
Practical Task
RPL
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.

There are currently no intakes for this course.
More Details
No additional details have been provided.