ENTG13003 - Advanced Materials in Aviation

General Information

Unit Synopsis

Materials used in the aviation industry have become ever diverse, more sophisticated, and very important as aerospace technologies developed rapidly. The selection of materials in the aircraft industry has a significant impact on all stages of aircraft life from the initial design phase, to manufacturing, flight operations, and maintenance, and when decommissioning. In this unit, you will learn about the principles and fundamentals of materials science and engineering. You will apply this knowledge to various types of advanced materials in aviation.

Details

Level Undergraduate
Unit Level 3
Credit Points 6
Student Contribution Band SCA Band 2
Fraction of Full-Time Student Load 0.125
Pre-requisites or Co-requisites

Aircraft Maintenance Practices

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Class Timetable View Unit Timetable
Residential School No Residential School

Unit Availabilities from Term 2 - 2024

Term 2 - 2024 Profile
Brisbane
Online
Rockhampton
Term 2 - 2025 Profile
Online
Rockhampton
Term 2 - 2026 Profile
Online
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Assessment Tasks

Assessment Task Weighting
1. Online Quiz(zes) 20%
2. Written Assessment 15%
3. Group Work 30%
4. Online Test 35%

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of ‘pass’ in order to pass the unit. If any ‘pass/fail’ tasks are shown in the table above they must also be completed successfully (‘pass’ grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the ‘assessment task’ section (note that in some instances, the minimum mark for a task may be greater than 50%).

Consult the University's Grades and Results Policy for more details of interim results and final grades

Past Exams

To view Past Exams,
please login
Previous Feedback

No previous feedback available

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Source: Verbal feedback
Feedback
The literature review assessment item could be challenging for those that have not done a similar assessment item or those that have not done a thesis unit.
Recommendation
More thorough information should be provided and discussed about the nature of the literature review and the purpose of the assessment item.
Action Taken
In Progress
Unit learning Outcomes

On successful completion of this unit, you will be able to:

  1. Develop equations for the governing theories of material failures in aviation
  2. Evaluate applications of advanced materials in electrical and mechanical components of aviation systems
  3. Investigate material selection for aviation systems by applying international standards and industry regulations
  4. Discuss advanced techniques for structural monitoring, non-destructive testing, and sustainable aircraft materials.

Alignment of Assessment Tasks to Learning Outcomes
Assessment Tasks Learning Outcomes
1 2 3 4
1 - Online Quiz(zes)
2 - Written Assessment
3 - Group Work
4 - Online Test
Alignment of Graduate Attributes to Learning Outcomes
Introductory Level
Intermediate Level
Graduate Level
Graduate Attributes Learning Outcomes
1 2 3 4
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
Alignment of Assessment Tasks to Graduate Attributes
Introductory Level
Intermediate Level
Graduate Level
Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10