This qualification provides competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control.
This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.
Course Type | Qualification | ||||||
---|---|---|---|---|---|---|---|
Student Availability |
|
||||||
Fees |
|
||||||
Application Mode |
|
||||||
How to Apply | Please Enquire | ||||||
Study Area | Please Enquire | ||||||
Skill Area |
|
||||||
AQF Level | Level 3: Certificate III |
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
---|---|
International Students CRICOS Codes |
Not Applicable |
Electronic Equipment Trades Worker
Study Mode Definitions
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
This course is for apprentices only.
Core Completion requirements The requirements for granting this qualification will be met when competency is demonstrated and achieved for. • All the Core competency standard units, defined in the Core Competency Standard Units table below and • A combination of Elective competency standard units to achieve a total weighting of 140 points in accordance with the Elective Competency Standard Further information available from Training.gov |
||||
---|---|---|---|---|
UEENEEI106A | Set up and adjust PID control loops | More Information | Training.gov Details | |
UEENEEC024B | Participate in instrumentation and control work and competency development activities | More Information | Training.gov Details | |
UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | More Information | Training.gov Details | |
UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | More Information | Training.gov Details | |
UEENEEE104A | Solve problems in d.c. circuits | More Information | Training.gov Details | |
UEENEEE105A | Fix and secure electrotechnology equipment | More Information | Training.gov Details | |
UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | More Information | Training.gov Details | |
UEENEEE119A | Solve problems in multiple path extra low voltage (ELV) a.c. circuits | More Information | Training.gov Details | |
UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | More Information | Training.gov Details | |
UEENEEI101A | Use instrumentation drawings, specification, standards and equipment manuals | More Information | Training.gov Details | |
UEENEEI102A | Solve problems in pressure measurement components and systems | More Information | Training.gov Details | |
UEENEEI103A | Solve problems in density/level measurement components and systems | More Information | Training.gov Details | |
UEENEEI104A | Solve problems in flow measurement components and systems | More Information | Training.gov Details | |
UEENEEI105A | Solve problems in temperature measurement components and systems | More Information | Training.gov Details | |
UEENEEI107A | Install instrumentation and control cabling and tubing | More Information | Training.gov Details | |
UEENEEI108A | Install instrumentation and control apparatus and associated equipment | More Information | Training.gov Details | |
UEENEEI110A | Set up and adjust advanced PID process control loops | More Information | Training.gov Details | |
UEENEEI111A | Find and rectify faults in process final control elements | More Information | Training.gov Details | |
UEENEEI112A | Verify compliance and functionality of instrumentation and control installations | More Information | Training.gov Details | |
UEENEEI113A | Setup and configure human-machine interface (HMI) and industrial networks | More Information | Training.gov Details | |
UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers | More Information | Training.gov Details | |
UEENEEK142A | Apply environmentally and sustainable procedures in the energy sector | More Information | Training.gov Details | |
UEENEEP013A | Disconnect - reconnect control devices connected to low voltage installation wiring | More Information | Training.gov Details | |
Electives | ||||
UEENEEI118A | Set up weighting measuring and control instruments | More Information | Training.gov Details | |
UEENEEI131A | Set up gas analysis measuring and control instruments | More Information | Training.gov Details | |
UEENEEI132A | Set up water analysis measuring and control instruments | More Information | Training.gov Details | |
UEENEEH111A | Troubleshoot single phase input d.c. power supplies | More Information | Training.gov Details | |
UEENEED101A | Use computer applications relevant to a workplace | More Information | Training.gov Details | |
UEENEEC002B | Source and purchase material/parts for installation or service jobs | More Information | Training.gov Details |
Unit Code | Unit Name |
---|---|
UEENEEI106A | Set up and adjust PID control loops |
UEENEEC024B | Participate in instrumentation and control work and competency development activities |
UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace |
UEENEEE102A | Fabricate, assemble and dismantle utilities industry components |
UEENEEE104A | Solve problems in d.c. circuits |
UEENEEE105A | Fix and secure electrotechnology equipment |
UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications |
UEENEEE119A | Solve problems in multiple path extra low voltage (ELV) a.c. circuits |
UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work |
UEENEEI101A | Use instrumentation drawings, specification, standards and equipment manuals |
UEENEEI102A | Solve problems in pressure measurement components and systems |
UEENEEI103A | Solve problems in density/level measurement components and systems |
UEENEEI104A | Solve problems in flow measurement components and systems |
UEENEEI105A | Solve problems in temperature measurement components and systems |
UEENEEI107A | Install instrumentation and control cabling and tubing |
UEENEEI108A | Install instrumentation and control apparatus and associated equipment |
UEENEEI110A | Set up and adjust advanced PID process control loops |
UEENEEI111A | Find and rectify faults in process final control elements |
UEENEEI112A | Verify compliance and functionality of instrumentation and control installations |
UEENEEI113A | Setup and configure human-machine interface (HMI) and industrial networks |
UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers |
UEENEEK142A | Apply environmentally and sustainable procedures in the energy sector |
UEENEEP013A | Disconnect - reconnect control devices connected to low voltage installation wiring |
UEENEEI118A | Set up weighting measuring and control instruments |
UEENEEI131A | Set up gas analysis measuring and control instruments |
UEENEEI132A | Set up water analysis measuring and control instruments |
UEENEEH111A | Troubleshoot single phase input d.c. power supplies |
UEENEED101A | Use computer applications relevant to a workplace |
UEENEEC002B | Source and purchase material/parts for installation or service jobs |
Assessment Types |
---|
Written/Electronic Assessment |
Practical Task |
Third Party Verification |
Project |
RPL |