-
CQUni Phonebook CQUni Phonebook
-
User Quick links Profile
CQUni Handbook
Previous Version
Version Effective: 10th of September, 2024
CPC30220 - Certificate III in Carpentry
Course Details
Course Summary
Provides carpentry apprentices with the skills and knowledge to work in the carpentry trade. Competencies include planning and organising work, constructing wall frames, using carpentry tools and equipment, carry out leveling operations and roof framing. Topics covered include occupational health and safety, reading and interpreting plans, measurements and calculations, shaping materials and assembling components with hand and power tools, setting out buildings and footings on-site using a variety of leveling devices such as lasers, constructing timber pitching roof frames, installing sub-floor framing, timber/sheet flooring and door frames. Elective choices may lead to specific occupations within the industry sector.
Entry Requirements
This course is for apprenticeship training only. Students must be employed as apprentices in a relevant industry.
Completion of the BKSB (Basic Key Skills Builder) online literacy and numeracy assessment prior to enrolment, unless the student has completed an equal or higher level course.
Course Details
| Course Type | Qualification | ||||||
|---|---|---|---|---|---|---|---|
| Student Availability |
|
||||||
| Fees |
|
||||||
| Application Mode |
|
||||||
| How to Apply | Please Enquire | ||||||
| Study Area |
|
||||||
| Skill Area |
|
||||||
| AQF Level | Level 3: Certificate III |
Admission Codes
|
Domestic Students Tertiary Admission Centre Codes (TAC) Codes |
Not Applicable |
|---|---|
|
International Students CRICOS Codes |
Not Applicable |
Student Outcomes, Career Opportunities and Occupations
Occupational outcome of carpenter.
Course Structures
In order to complete this course, you must:
- Complete 27 core units
- Complete 7 elective units
Study Mode Definitions
- Online: Online courses provide the flexibility to study without normally requiring a student to visit a campus. Course content is studied through a number of means including the use of online discussion forums, electronic library resources, by contacting lecturers and teachers, and receiving study materials online/electronically. Work integrated learning, including placements, may be included in some courses.
- On-campus: Students studying in on-campus mode typically are expected to attend and participate in regular, structured on-campus teaching and learning activities throughout the University’s academic term. These activities may include lectures, tutorials, workshops and practice, online or other activities and normally will be timetabled at a CQUniversity campus or approved delivery site.
- Mixed Mode: Students studying in mixed mode will participate in a combination of online learning activities in addition to site-specific learning activities, which may include residential schools, co-op placements and/or work-integrated learning as a compulsory requirement of a unit. The additional site-specific learning activities are what differentiates a mixed-mode unit from an online unit.
*All study modes may include Vocational placement and/or work integrated learning.
Select a course structure below to view the delivery details, including the different study modes offered for each structure.
Please select a course structure from the options below:
Rockhampton
Apprentices Only
Approximately 950 hours of study time will be involved however, the training duration will depend on the electives chosen for the apprenticeship.
- On-campus
- Employer Based (VET Providers Only)
- RPL/RCC/Credit
| Core | ||||
|---|---|---|---|---|
| CPCCCA2002 | Use carpentry tools and equipment | More Information | Training.gov Details | |
| CPCCCA2011 | Handle carpentry materials | More Information | Training.gov Details | |
| CPCCCA3002 | Carry out setting out | More Information | Training.gov Details | |
| CPCCCA3003 | Install flooring systems | More Information | Training.gov Details | |
| CPCCCA3004 | Construct and erect wall frames | More Information | Training.gov Details | |
| CPCCCA3005 | Construct ceiling frames | More Information | Training.gov Details | |
| CPCCCA3006 | Erect roof trusses | More Information | Training.gov Details | |
| CPCCCA3007 | Construct pitched roofs | More Information | Training.gov Details | |
| CPCCCA3008 | Construct eaves | More Information | Training.gov Details | |
| CPCCCA3010 | Install windows and doors | More Information | Training.gov Details | |
| CPCCCA3016 | Construct, assemble and install timber external stairs | More Information | Training.gov Details | |
| CPCCCA3017 | Install exterior cladding | More Information | Training.gov Details | |
| CPCCCA3024 | Install lining, paneling and moulding | More Information | Training.gov Details | |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work | More Information | Training.gov Details | |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details | |
| CPCCCM2006 | Apply basic levelling procedures | More Information | Training.gov Details | |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
| CPCCCM2012 | Work safely at heights | More Information | Training.gov Details | |
| CPCCCO2013 | Carry out concreting to simple forms | More Information | Training.gov Details | |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
| CPCCOM1014 | Conduct workplace communication | More Information | Training.gov Details | |
| CPCCOM1015 | Carry out measurements and calculations | More Information | Training.gov Details | |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | More Information | Training.gov Details | |
| CPCCOM3006 | Carry out levelling operations | More Information | Training.gov Details | |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | More Information | Training.gov Details | |
| CPCCCA3001 | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
|
Elective Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules. |
||||
| CPCPCM2043 | Carry out WHS requirements | More Information | Training.gov Details | |
| CPCCOM1013 | Plan and organise work | More Information | Training.gov Details | |
| CPCCCM2002 | Carry out hand excavation | More Information | Training.gov Details | |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools | More Information | Training.gov Details | |
| CPCCSF2004 | Place and fix reinforcement materials | More Information | Training.gov Details | |
| CPCCCA3012 | Frame and fit wet area fixtures | More Information | Training.gov Details | |
| CPCCCA3014 | Construct and install bulkheads | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| CPCCCA2002 | Use carpentry tools and equipment |
| CPCCCA2011 | Handle carpentry materials |
| CPCCCA3002 | Carry out setting out |
| CPCCCA3003 | Install flooring systems |
| CPCCCA3004 | Construct and erect wall frames |
| CPCCCA3005 | Construct ceiling frames |
| CPCCCA3006 | Erect roof trusses |
| CPCCCA3007 | Construct pitched roofs |
| CPCCCA3008 | Construct eaves |
| CPCCCA3010 | Install windows and doors |
| CPCCCA3016 | Construct, assemble and install timber external stairs |
| CPCCCA3017 | Install exterior cladding |
| CPCCCA3024 | Install lining, paneling and moulding |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground |
| CPCCCM2006 | Apply basic levelling procedures |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding |
| CPCCCM2012 | Work safely at heights |
| CPCCCO2013 | Carry out concreting to simple forms |
| CPCCOM1012 | Work effectively and sustainably in the construction industry |
| CPCCOM1014 | Conduct workplace communication |
| CPCCOM1015 | Carry out measurements and calculations |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements |
| CPCCOM3006 | Carry out levelling operations |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies |
| CPCCCA3001 | Carry out general demolition of minor building structures |
| CPCPCM2043 | Carry out WHS requirements |
| CPCCOM1013 | Plan and organise work |
| CPCCCM2002 | Carry out hand excavation |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools |
| CPCCSF2004 | Place and fix reinforcement materials |
| CPCCCA3012 | Frame and fit wet area fixtures |
| CPCCCA3014 | Construct and install bulkheads |
Mackay
Apprentices Only
Approximately 950 hours of study time will be involved however, the training duration will depend on the electives chosen for the apprenticeship.
- RPL/RCC/Credit
- Employer Based (VET Providers Only)
- On-campus
| Core | ||||
|---|---|---|---|---|
| CPCCCA2002 | Use carpentry tools and equipment | More Information | Training.gov Details | |
| CPCCCA2011 | Handle carpentry materials | More Information | Training.gov Details | |
| CPCCCA3002 | Carry out setting out | More Information | Training.gov Details | |
| CPCCCA3003 | Install flooring systems | More Information | Training.gov Details | |
| CPCCCA3004 | Construct and erect wall frames | More Information | Training.gov Details | |
| CPCCCA3005 | Construct ceiling frames | More Information | Training.gov Details | |
| CPCCCA3006 | Erect roof trusses | More Information | Training.gov Details | |
| CPCCCA3007 | Construct pitched roofs | More Information | Training.gov Details | |
| CPCCCA3008 | Construct eaves | More Information | Training.gov Details | |
| CPCCCA3010 | Install windows and doors | More Information | Training.gov Details | |
| CPCCCA3016 | Construct, assemble and install timber external stairs | More Information | Training.gov Details | |
| CPCCCA3017 | Install exterior cladding | More Information | Training.gov Details | |
| CPCCCA3024 | Install lining, paneling and moulding | More Information | Training.gov Details | |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work | More Information | Training.gov Details | |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details | |
| CPCCCM2006 | Apply basic levelling procedures | More Information | Training.gov Details | |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
| CPCCCM2012 | Work safely at heights | More Information | Training.gov Details | |
| CPCCCO2013 | Carry out concreting to simple forms | More Information | Training.gov Details | |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
| CPCCOM1014 | Conduct workplace communication | More Information | Training.gov Details | |
| CPCCOM1015 | Carry out measurements and calculations | More Information | Training.gov Details | |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | More Information | Training.gov Details | |
| CPCCOM3006 | Carry out levelling operations | More Information | Training.gov Details | |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | More Information | Training.gov Details | |
| CPCCCA3001 | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
|
Elective Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules. |
||||
| CPCPCM2043 | Carry out WHS requirements | More Information | Training.gov Details | |
| CPCCOM1013 | Plan and organise work | More Information | Training.gov Details | |
| CPCCCM2002 | Carry out hand excavation | More Information | Training.gov Details | |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools | More Information | Training.gov Details | |
| CPCCSF2004 | Place and fix reinforcement materials | More Information | Training.gov Details | |
| CPCCCA3012 | Frame and fit wet area fixtures | More Information | Training.gov Details | |
| CPCCCA3014 | Construct and install bulkheads | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| CPCCCA2002 | Use carpentry tools and equipment |
| CPCCCA2011 | Handle carpentry materials |
| CPCCCA3002 | Carry out setting out |
| CPCCCA3003 | Install flooring systems |
| CPCCCA3004 | Construct and erect wall frames |
| CPCCCA3005 | Construct ceiling frames |
| CPCCCA3006 | Erect roof trusses |
| CPCCCA3007 | Construct pitched roofs |
| CPCCCA3008 | Construct eaves |
| CPCCCA3010 | Install windows and doors |
| CPCCCA3016 | Construct, assemble and install timber external stairs |
| CPCCCA3017 | Install exterior cladding |
| CPCCCA3024 | Install lining, paneling and moulding |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground |
| CPCCCM2006 | Apply basic levelling procedures |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding |
| CPCCCM2012 | Work safely at heights |
| CPCCCO2013 | Carry out concreting to simple forms |
| CPCCOM1012 | Work effectively and sustainably in the construction industry |
| CPCCOM1014 | Conduct workplace communication |
| CPCCOM1015 | Carry out measurements and calculations |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements |
| CPCCOM3006 | Carry out levelling operations |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies |
| CPCCCA3001 | Carry out general demolition of minor building structures |
| CPCPCM2043 | Carry out WHS requirements |
| CPCCOM1013 | Plan and organise work |
| CPCCCM2002 | Carry out hand excavation |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools |
| CPCCSF2004 | Place and fix reinforcement materials |
| CPCCCA3012 | Frame and fit wet area fixtures |
| CPCCCA3014 | Construct and install bulkheads |
Gladstone
Apprentices Only
Approximately 950 hours of study time will be involved however, the training duration will depend on the electives chosen for the apprenticeship.
- RPL/RCC/Credit
- Employer Based (VET Providers Only)
- On-campus
| Core | ||||
|---|---|---|---|---|
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | More Information | Training.gov Details | |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
| CPCCOM3006 | Carry out levelling operations | More Information | Training.gov Details | |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | More Information | Training.gov Details | |
| CPCCOM1015 | Carry out measurements and calculations | More Information | Training.gov Details | |
| CPCCOM1014 | Conduct workplace communication | More Information | Training.gov Details | |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
| CPCCCO2013 | Carry out concreting to simple forms | More Information | Training.gov Details | |
| CPCCCM2012 | Work safely at heights | More Information | Training.gov Details | |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
| CPCCCM2006 | Apply basic levelling procedures | More Information | Training.gov Details | |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details | |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work | More Information | Training.gov Details | |
| CPCCCA3024 | Install lining, paneling and moulding | More Information | Training.gov Details | |
| CPCCCA3017 | Install exterior cladding | More Information | Training.gov Details | |
| CPCCCA3016 | Construct, assemble and install timber external stairs | More Information | Training.gov Details | |
| CPCCCA3010 | Install windows and doors | More Information | Training.gov Details | |
| CPCCCA3008 | Construct eaves | More Information | Training.gov Details | |
| CPCCCA3007 | Construct pitched roofs | More Information | Training.gov Details | |
| CPCCCA3006 | Erect roof trusses | More Information | Training.gov Details | |
| CPCCCA3005 | Construct ceiling frames | More Information | Training.gov Details | |
| CPCCCA3004 | Construct and erect wall frames | More Information | Training.gov Details | |
| CPCCCA3003 | Install flooring systems | More Information | Training.gov Details | |
| CPCCCA3002 | Carry out setting out | More Information | Training.gov Details | |
| CPCCCA2011 | Handle carpentry materials | More Information | Training.gov Details | |
| CPCCCA2002 | Use carpentry tools and equipment | More Information | Training.gov Details | |
| CPCCCA3001 | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
|
Elective Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules. |
||||
| CPCCCA3014 | Construct and install bulkheads | More Information | Training.gov Details | |
| CPCCCA3012 | Frame and fit wet area fixtures | More Information | Training.gov Details | |
| CPCCSF2004 | Place and fix reinforcement materials | More Information | Training.gov Details | |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools | More Information | Training.gov Details | |
| CPCCCM2002 | Carry out hand excavation | More Information | Training.gov Details | |
| CPCCOM1013 | Plan and organise work | More Information | Training.gov Details | |
| CPCPCM2043 | Carry out WHS requirements | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| CPCWHS3001 | Identify construction work hazards and select risk control strategies |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| CPCCOM3006 | Carry out levelling operations |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements |
| CPCCOM1015 | Carry out measurements and calculations |
| CPCCOM1014 | Conduct workplace communication |
| CPCCOM1012 | Work effectively and sustainably in the construction industry |
| CPCCCO2013 | Carry out concreting to simple forms |
| CPCCCM2012 | Work safely at heights |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding |
| CPCCCM2006 | Apply basic levelling procedures |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work |
| CPCCCA3024 | Install lining, paneling and moulding |
| CPCCCA3017 | Install exterior cladding |
| CPCCCA3016 | Construct, assemble and install timber external stairs |
| CPCCCA3010 | Install windows and doors |
| CPCCCA3008 | Construct eaves |
| CPCCCA3007 | Construct pitched roofs |
| CPCCCA3006 | Erect roof trusses |
| CPCCCA3005 | Construct ceiling frames |
| CPCCCA3004 | Construct and erect wall frames |
| CPCCCA3003 | Install flooring systems |
| CPCCCA3002 | Carry out setting out |
| CPCCCA2011 | Handle carpentry materials |
| CPCCCA2002 | Use carpentry tools and equipment |
| CPCCCA3001 | Carry out general demolition of minor building structures |
| CPCCCA3014 | Construct and install bulkheads |
| CPCCCA3012 | Frame and fit wet area fixtures |
| CPCCSF2004 | Place and fix reinforcement materials |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools |
| CPCCCM2002 | Carry out hand excavation |
| CPCCOM1013 | Plan and organise work |
| CPCPCM2043 | Carry out WHS requirements |
Rockhampton 2025
Apprentices Only
Approximately 950 hours of study time will be involved however, the training duration will depend on the electives chosen for the apprenticeship.
- On-campus
- Employer Based (VET Providers Only)
- RPL/RCC/Credit
| Core | ||||
|---|---|---|---|---|
| CPCCCA2002 | Use carpentry tools and equipment | More Information | Training.gov Details | |
| CPCCCA2011 | Handle carpentry materials | More Information | Training.gov Details | |
| CPCCCA3002 | Carry out setting out | More Information | Training.gov Details | |
| CPCCCA3003 | Install flooring systems | More Information | Training.gov Details | |
| CPCCCA3004 | Construct and erect wall frames | More Information | Training.gov Details | |
| CPCCCA3005 | Construct ceiling frames | More Information | Training.gov Details | |
| CPCCCA3006 | Erect roof trusses | More Information | Training.gov Details | |
| CPCCCA3007 | Construct pitched roofs | More Information | Training.gov Details | |
| CPCCCA3008 | Construct eaves | More Information | Training.gov Details | |
| CPCCCA3010 | Install windows and doors | More Information | Training.gov Details | |
| CPCCCA3016 | Construct, assemble and install timber external stairs | More Information | Training.gov Details | |
| CPCCCA3017 | Install exterior cladding | More Information | Training.gov Details | |
| CPCCCA3024 | Install lining, paneling and moulding | More Information | Training.gov Details | |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work | More Information | Training.gov Details | |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground | More Information | Training.gov Details | |
| CPCCCM2006 | Apply basic levelling procedures | More Information | Training.gov Details | |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | More Information | Training.gov Details | |
| CPCCCM2012 | Work safely at heights | More Information | Training.gov Details | |
| CPCCCO2013 | Carry out concreting to simple forms | More Information | Training.gov Details | |
| CPCCOM1012 | Work effectively and sustainably in the construction industry | More Information | Training.gov Details | |
| CPCCOM1014 | Conduct workplace communication | More Information | Training.gov Details | |
| CPCCOM1015 | Carry out measurements and calculations | More Information | Training.gov Details | |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements | More Information | Training.gov Details | |
| CPCCOM3006 | Carry out levelling operations | More Information | Training.gov Details | |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | More Information | Training.gov Details | |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies | More Information | Training.gov Details | |
| CPCCCA3001 | Carry out general demolition of minor building structures | More Information | Training.gov Details | |
|
Elective Please note electives can be amended to suit Employer/Apprentice requirements and are to be chosen according to the Training Package Packaging Rules. |
||||
| CPCPCM2043 | Carry out WHS requirements | More Information | Training.gov Details | |
| CPCCOM1013 | Plan and organise work | More Information | Training.gov Details | |
| CPCCCM2002 | Carry out hand excavation | More Information | Training.gov Details | |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools | More Information | Training.gov Details | |
| CPCCSF2004 | Place and fix reinforcement materials | More Information | Training.gov Details | |
| CPCCCA3012 | Frame and fit wet area fixtures | More Information | Training.gov Details | |
| CPCCCA3014 | Construct and install bulkheads | More Information | Training.gov Details | |
Unit Sequence
For the following units, you may choose your own order of study, while taking into account pre-requisite requirements and the unit availability.
| Unit Code | Unit Name |
|---|---|
| CPCCCA2002 | Use carpentry tools and equipment |
| CPCCCA2011 | Handle carpentry materials |
| CPCCCA3002 | Carry out setting out |
| CPCCCA3003 | Install flooring systems |
| CPCCCA3004 | Construct and erect wall frames |
| CPCCCA3005 | Construct ceiling frames |
| CPCCCA3006 | Erect roof trusses |
| CPCCCA3007 | Construct pitched roofs |
| CPCCCA3008 | Construct eaves |
| CPCCCA3010 | Install windows and doors |
| CPCCCA3016 | Construct, assemble and install timber external stairs |
| CPCCCA3017 | Install exterior cladding |
| CPCCCA3024 | Install lining, paneling and moulding |
| CPCCCA3025 | Read and interpret plans, specifications and drawings for carpentry work |
| CPCCCA3028 | Erect and dismantle formwork for footings and slabs on ground |
| CPCCCM2006 | Apply basic levelling procedures |
| CPCCCM2008 | Erect and dismantle restricted height scaffolding |
| CPCCCM2012 | Work safely at heights |
| CPCCCO2013 | Carry out concreting to simple forms |
| CPCCOM1012 | Work effectively and sustainably in the construction industry |
| CPCCOM1014 | Conduct workplace communication |
| CPCCOM1015 | Carry out measurements and calculations |
| CPCCOM3001 | Perform construction calculations to determine carpentry material requirements |
| CPCCOM3006 | Carry out levelling operations |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
| CPCWHS3001 | Identify construction work hazards and select risk control strategies |
| CPCCCA3001 | Carry out general demolition of minor building structures |
| CPCPCM2043 | Carry out WHS requirements |
| CPCCOM1013 | Plan and organise work |
| CPCCCM2002 | Carry out hand excavation |
| CPCCCA3027 | Set up, operate and maintain indirect action powder-actuated power tools |
| CPCCSF2004 | Place and fix reinforcement materials |
| CPCCCA3012 | Frame and fit wet area fixtures |
| CPCCCA3014 | Construct and install bulkheads |
Course Assessment Information
RPL - Students who have previous informal and formal learning need to advise their trainer/assessor prior to enrolment. If the student wishes to apply for an RPL they need to apply to the RPL Centre.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
Credit transfer - If credit for relevant formal qualifications is sought, then the process will be actioned after the student has enrolled in at least one unit of competency as directed by the relevant trainer/assessor. The Trainer/Assessor will work with the student on their credit transfer application, and provide advice and support as necessary.
| Assessment Types |
|---|
| Third Party Verification |
| Written/Electronic Assessment |
| Practical Task |
| RPL |
Course Learning Outcomes
Where and when can I start?
Please view the more details information for any additional information related to this course.
There are currently no intakes for this course.
More Details
No additional details have been provided.