In order to complete this course, you must:

1. Complete the Core Structure
2. Complete 1 Major

The More Details tab has a link to the Course Planners for this course.

The units below are the Core Foundation units for Bachelor of Engineering (Honours). You should complete these units first.

If you are enrolled in civil, electrical or mechanical majors your Course Planner includes the MATH11247 Foundation Mathematics unit. You can opt out of the MATH11247 Foundation Mathematics unit and complete an elective instead after successfully completing a mathematic self-diagnostics test. See More Details tab for how to access the diagnostic test and alternative pathways for completing the first year mathematics units.

Available units
Students must complete the following compulsory units:
ENEG11005	Introduction to Contemporary Engineering
MATH11218	Applied Mathematics
ENEG11006	Engineering Statics
ENEG11007	Engineering Industry Project Investigation
ENEG11008	Materials for Engineers
MATH11219	Applied Calculus
ENEG11009	Fundamentals of Sustainable Energy

In addition to the core foundation units listed above, you must complete the following Diploma of Professional Practice (Co-op Engineering) units during your course. This Diploma consists of three compulsory units, two compulsory 24-week work placements and one Leadership Elective.

If you are intending to go on placement at the end of your second year of study, you should enrol in ENEP11007 Engineering Employment Preparation in Year 2 Term 2. As ENEP11007 is prerequisite to ENEP11006 Industry Practice 1, you will not be able to go on placement if you have not completed ENEP11007. Go to the More Details tab for a link to the Course Planners for this course.

Available units
Students must complete the following compulsory units:
ENEP11007	Engineering Employment Preparation
ENEP11006	Industry Practice 1
ENEP11010	Industry Practice Review
ENEP12007	Engineering Business Fundamentals
ENEP12010	Industry Practice 2

Available units
Students must complete 1 from the following units:
ENEP12008	Engineering Leadership
ENEG13001	Humanitarian Engineering Project

In the civil major, you will study the following intermediate units.

Note that you are required to complete 30cp in year 2 term 2 and year 3 term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms. 

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEC12009	Engineering Surveying and Spatial Sciences
ENEG12007	Creative Engineering
ENEC12010	Hydraulics and Hydrology
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEC12008	Geotechnical Engineering
ENEC12011	Transport Systems
ENEC12012	Stress Analysis

You will study the following advanced units. ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements. 

Available units
Students must complete the following compulsory units:
ENEC13015	Steel and Timber Design
ENEC13017	Advanced Structural Analysis
ENEC13016	Concrete Technology and Design
ENEC13014	Water Supply and Wastewater Technology
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering

Electives

In addition to the units listed above, there is one elective slot in the civil major.

If you opt out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective. 

Capstone Project

Finally, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling in the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the electrical major, you will study the following intermediate units.

Note that you are required to complete 30cp in year 2 term 2 and year 3 term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms. 

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEE12014	Electrical Circuit Analysis
ENEG12007	Creative Engineering
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEE13018	Analogue Electronics
ENEE13020	Digital Electronics

You will study the following advanced units. Note that ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements. 

Available units
Students must complete the following compulsory units:
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

Electives

In addition to the units listed above, there is one elective slot in the electrical major.

If you opt out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective. 

There is a pre-approved set of electives available in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact your Course Adviser to discuss.

Capstone Project

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling in the final year projects units.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the mechanical major, you will study the following intermediate units.

Note that you are required to complete 30cp in year 2 term 2 and year 3 term 2 for this course. Please contact the Course Advisors for enrolment assistance for these two terms. 

Available units
Students must complete the following compulsory units:
MATH11247	Foundation Mathematics
ENEM12006	Fluid Mechanics
ENEG12007	Creative Engineering
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEM12009	Structural Mechanics
ENEM12010	Engineering Dynamics
ENEM13018	Materials and Manufacturing
ENEM13014	Thermodynamics

You will study the following advanced units. Note that ENEM14014, ENEM14015 and ENEM14016 are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements. 

Available units
Students must complete the following compulsory units:
ENEM13012	Maintenance Engineering
ENEM12008	Solid Materials Handling
ENEM14014	Capstone Thermofluid Engineering
ENEM14015	Dynamic System Modelling and Control
ENEM14016	Fluid Machinery
ENEM13015	Design of Machine Elements
ENEM14011	Energy Conversion

Electives

In addition to the units listed above, there is one elective slot in the mechanical major.

If you opt out of the MATH11247 Foundation Mathematics unit you are required to complete an additional 6cp elective. 

There is a pre-approved set of electives available in the Course Planner (the link is in the More Details tab). Should you wish to complete an elective not on the pre-approved list, contact your Course Adviser to discuss.

Capstone  Project

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see the More Details section for information on enrolling in the final year project units.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the mechatronics major, you will study the following intermediate units.

Note that if you are intending to go on placement at the end of your second year of study, you should enrol in ENEP11007 Engineering Employment Preparation in Year 2 Term 2 in addition to the units below.

Available units
Students must complete the following compulsory units:
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
ENEM12010	Engineering Dynamics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEX12002	Introductory Electronics
ENEE12016	Signals and Systems
ENEX12001	Electrical Power and Machines
ENEM12009	Structural Mechanics

You will study the following advanced units. Note that ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double credit-point (12cp) units intended to provide an authentic project experience.

You may need to rearrange your Course Planner around your work placements. If you are not undertaking the work placements designated in the original Course Planner, please contact the Course Advisors to modify your work planners to suit the work placements. 

Available units
Students must complete the following compulsory units:
ENEX13001	Industrial Control and Automation
ENEX13002	Power Electronics
ENEX13003	Mechanical Design Practice
ENEX13004	Robotics and Autonomous Systems
ENEE13019	Control Systems Analysis and Design
ENEX13006	Thermofluids Theory and Applications
ENEX13005	Machine Design and Vibrations
ENEE14006	Embedded Microcontrollers
ENEX14001	Mechatronics Systems Design

Capstone Project

At the end of your course, you will complete a final year engineering project over 2 terms. the final year engineering project confirms your ability to work as a professional engineer.

Please see the More Details tab for information on enrolling in the final year project units.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation