In order to complete this course, you must:

1. Complete the Core Structure
2. Complete 1 Major

The More Details tab has a link to the Course Planners for this course.

Note that full-time students generally enrol in 24cp per term and part-time students (working more than 20 hours a week) generally enrol in a half-load i.e. 12cp per term.

In the Core structure, Fundamentals of Professional Engineering Practice is a 12cp unit which assists your transition to university study. All other Core units are 6cp.

Available units
Students must complete the following compulsory units:
ENEG11005	Introduction to Contemporary Engineering
MATH11218	Applied Mathematics
ENEG11006	Engineering Statics
ENEG11007	Engineering Industry Project Investigation
ENEG11008	Materials for Engineers
MATH11219	Applied Calculus
ENEG11009	Fundamentals of Sustainable Energy

In the civil major, you will study the following intermediate units.

Available units
Students must complete the following compulsory units:
ENEG12007	Creative Engineering
ENEC12009	Engineering Surveying and Spatial Sciences
ENEC12010	Hydraulics and Hydrology
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEC12008	Geotechnical Engineering
ENEC12011	Transport Systems
ENEC12012	Stress Analysis

You will study the following advanced units.

Please note that ENEC14014, ENEC14016 and ENEC14017 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEC13015	Steel and Timber Design
ENEC13017	Advanced Structural Analysis
ENEC13016	Concrete Technology and Design
ENEC13014	Water Supply and Wastewater Technology
ENEC14014	Structural and Geotechnical Design
ENEC14016	Traffic and Transportation Engineering
ENEC14017	Water Resources Engineering

In addition to the units listed above, there are 3 elective slots in the civil major.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). One of your electives must be a professional practice elective. Should you wish to complete an elective not on the pre-approved list, contact your Course Adviser to discuss.

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the electrical major, you will study the following intermediate units.

Available units
Students must complete the following compulsory units:
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEE12015	Electrical Power Engineering
ENEE12016	Signals and Systems
ENEE13018	Analogue Electronics
ENEE13020	Digital Electronics

You will study the following advanced units.

Please note that ENEE14005, ENEE14006 and ENEE14007 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEE13016	Power System Protection
ENEE13019	Control Systems Analysis and Design
ENEE13021	Power System Analysis and Design
ENEE13022	Communication Technology
ENEE14005	Capstone Power and Control Design
ENEE14006	Embedded Microcontrollers
ENEE14007	Electrical Machines and Drives Applications

In addition to the units listed above, there are 3 elective slots in the electrical major.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). One of your electives must be a professional practice elective. Should you wish to complete an elective not on the pre-approved list, contact your Course Adviser to discuss.

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the mechanical major, you will study the following intermediate units.

Available units
Students must complete the following compulsory units:
ENEG12007	Creative Engineering
ENEM12006	Fluid Mechanics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEM12009	Structural Mechanics
ENEM12010	Engineering Dynamics
ENEM13014	Thermodynamics
ENEM13018	Materials and Manufacturing

You will study the following advanced units.

Please note that ENEM14014, ENEM14015 and ENEM14016 are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEM13012	Maintenance Engineering
ENEM12008	Solid Materials Handling
ENEM14014	Capstone Thermofluid Engineering
ENEM14015	Dynamic System Modelling and Control
ENEM14016	Fluid Machinery
ENEM13015	Design of Machine Elements
ENEM14011	Energy Conversion

In addition to the units listed above, there are 3 elective slots in the mechanical major.

There is a pre-approved set of electives listed in the Course Planner (the link is in the More Details tab). One of your electives must be a professional practice elective. Should you wish to complete an elective not on the pre-approved list, contact your Course Adviser to discuss.

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

In the mechatronics major, you will study the following intermediate units.

Available units
Students must complete the following compulsory units:
ENEG12007	Creative Engineering
ENEE12014	Electrical Circuit Analysis
ENEM12010	Engineering Dynamics
MATH12222	Advanced Mathematical Applications
MATH12225	Applied Computational Modelling
ENEX12002	Introductory Electronics
ENEE12016	Signals and Systems
ENEX12001	Electrical Power and Machines
ENEM12009	Structural Mechanics

You will study the following advanced units.

Please note that ENEX14001 Mechatronics Systems Design and ENEE14006 Embedded Microcontrollers are double credit-point (12cp) units intended to provide an authentic project experience.

Available units
Students must complete the following compulsory units:
ENEX13001	Industrial Control and Automation
ENEX13002	Power Electronics
ENEX13003	Mechanical Design Practice
ENEX13004	Robotics and Autonomous Systems
ENEE13019	Control Systems Analysis and Design
ENEX13005	Machine Design and Vibrations
ENEX13006	Thermofluids Theory and Applications
ENEE14006	Embedded Microcontrollers
ENEX14001	Mechatronics Systems Design

In addition to the units listed above, there is 1 elective slot in the mechatronics major.

This is a professional practice elective and must be one of 'Engineering Business Fundamentals', 'Engineering Employment Preparation', or 'Engineering Supervisor Development'.

Available units
Students may choose to do any of the following:
ENEP11007	Engineering Employment Preparation
ENEP12007	Engineering Business Fundamentals
ENEP12008	Engineering Leadership

At the end of your course, you will complete a final year engineering project over 2 terms. The final year engineering project confirms your ability to work as a professional engineer.

Please see More Details section for information on enrolling into the final year project units ENEG14003 and ENEG14005.

Available units
Students must complete the following compulsory units:
ENEG14003	Engineering Honours Project Planning
ENEG14005	Engineering Honours Project Implementation

After successfully completing the first two years of study at CQUniversity completing the Core units and the units listed below, students then enrol and transfer their unit credits via QTAC to the University of Queensland where they complete their final two years of study in mining engineering. Under the CQUni - UQ partnership, the mining specialisation is unable to accept international students through CRICOS.

Please note: Mining students need to apply directly to QTAC for third-year entry and credit towards a University of Queensland mining engineering degree. The University of Queensland does not offer its units in distance mode so students beginning this major will need to be physically located in Brisbane for the final two years of their study.

Available units
Students must complete the following compulsory units:
MATH12222	Advanced Mathematical Applications
ENEM12006	Fluid Mechanics
STAT11048	Essential Statistics
ENEM12010	Engineering Dynamics
ENEG12007	Creative Engineering
ENAR12014	Introduction to Mining Technology
ENAR12013	Mine Planning and Design
ENEC12008	Geotechnical Engineering

After successfully completing the first two years of study at CQUniversity as above, students then enrol and transfer their unit credits via QTAC to the University of Queensland where they complete their final two years of study in mining engineering.