CQUniversity Unit Profile
LMED29003 Transfusion and Transplantation Medicine 1
Transfusion and Transplantation Medicine 1
All details in this unit profile for LMED29003 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

This unit enables you to develop an understanding of the principles of transfusion and transplantation medicine. You will gain vital knowledge on topics such as safe blood storage and handling, blood and tissue typing and the detection and identification of antibodies significant in transfusion and solid tissue transplantation. You will also perform compatibility testing and discuss the potential adverse outcomes of blood transfusions plus pre-natal, antenatal and postnatal screening. You will be required to attend a compulsory residential school as outlined in the student handbook. The residential school may be scheduled outside of the term of offering of the unit. The theoretical and practical sessions will allow you to develop skills in critical steps necessary in ensuring safe tissue transplantations and appropriate blood products and components for transfusion in both routine and emergency situations.

Details

Career Level: Postgraduate
Unit Level: Level 9
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Prerequisites: Enrolment in Master of Laboratory Medicine.

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 2 - 2025

Melbourne
Mixed Mode
Rockhampton

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

1. Online Quiz(zes)
Weighting: 50%
2. Practical Assessment
Weighting: Pass/Fail
3. Examination
Weighting: 50%

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from SUTE

Feedback

Some students felt knowledge was shared in effective ways by full attention given to each student in their learning process, especially during residential school.

Recommendation

Continue to effectively communicate and support students in their learning process.

Feedback from SUTE

Feedback

Some students felt video recordings of lectures needed updating.

Recommendation

Consider updating lectures to clarify key concepts and challenging topics.

Feedback from Student Feedback

Feedback

Some students indicated that the online assessments tasks could be clearer.

Recommendation

Consider reviewing online assessments for clarity.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. Critically discuss the production, labelling, storage and transportation of human blood products and their medical indications
  2. Accurately interpret and report test results in transfusion and transplantation medicine
  3. Critically evaluate quality control practices in transfusion and transplantation medicine
  4. Demonstrate advanced testing skills in transfusion science including pre-transfusion, compatibility testing, antenatal / postnatal / neonatal screening and the testing for autoantibodies in accordance with quality control requirements for laboratory practices
  5. Critically evaluate the factors contributing to adverse outcomes and their effects in transfusion and transplantation medicine.

This unit was recently reviewed (03/2025) for course accreditation by AIMS - Australian Institute of Medical and Clinical Scientists. 

Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5
1 - Online Quiz(zes) - 50%
2 - Practical Assessment - 0%
3 - Examination - 50%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5
1 - Knowledge
2 - Communication
3 - Cognitive, technical and creative skills
4 - Research
5 - Self-management
6 - Ethical and Professional Responsibility
7 - Leadership
8 - Aboriginal and Torres Strait Islander Cultures
Textbooks and Resources

Textbooks

Prescribed

Modern Blood Banking and Transfusion Practices

Edition: 7th (2018)
Authors: Denise M Harmening
F.A. Davis Company
Pennsylvania Pennsylvania , PA , USA
ISBN: 9780803668881
Binding: Hardcover
Supplementary

Basic & Applied Concepts of Blood Banking and Transfusion Practices

Edition: 4th (2016)
Authors: Paula R Howard
Elsevier - Health Sciences Division
St Louis St Louis , Missouri , USA
ISBN: 9780323697392
Binding: Paperback
Supplementary

Immunohaematology: Principles and Practice

Edition: 3rd (2011)
Authors: Eva D. Quinley
Jones & Bartlett ( now BPS )
Sydney Sydney , NSW , Australia
ISBN: 978-0781782043
Binding: Hardcover
Supplementary

Transfusion and Transplantation Science

Edition: 2nd edn (2017)
Authors: Avent, Neil
Oxford University Press UK
Oxford Oxford , United Kingdom
ISBN: 9780198735731
Binding: Paperback

Additional Textbook Information

If you prefer to study with a paper copy, they can be purchased at the CQUni Bookshop at: http://bookshop.cqu.edu.au (search on the Unit code).

eBook version of the prescribed textbook can be purchased at: https://www.fadavis.com/product/modern-blood-banking-transfusion-practices-harmening-7 

Electronic access to prescribed and supplementary textbooks are available via the eReading Lists on the Moodle page.

IT Resources

You will need access to the following IT resources:
  • CQUniversity Student Email
  • Internet
  • Unit Website (Moodle)
Referencing Style

All submissions for this unit must use the referencing style: Vancouver

For further information, see the Assessment Tasks.

Teaching Contacts
Roxina Sharma Unit Coordinator
r.r.sharma@cqu.edu.au
Schedule
Week 1 Begin Date: 14 Jul 2025

Module/Topic

  1. Introduction to Transfusion and Transplantation Medicine 1
  2. Genetics
  3. Immunological Principles

Chapter

Part I – Chapter 1, pages 1-4; Chapters 2 and 3

Events and Submissions/Topic

Introduction and overview of unit

Tutorial - Week 1 content

Week 2 Begin Date: 21 Jul 2025

Module/Topic

Blood and Blood Components

Chapter

Part 1 - Chapter 1, pages 4-11

Part III – Chapters 13, 14, 15, 16, 18

Events and Submissions/Topic

Tutorial - Week 2 content

Week 3 Begin Date: 28 Jul 2025

Module/Topic

ABO and Rh Blood Group Systems

Chapter

Part I - Chapter 4

Part II – Chapters 6 and 7

Events and Submissions/Topic

Tutorial - week 3 content 

Week 4 Begin Date: 04 Aug 2025

Module/Topic

  1. Other Common Blood Groups
  2. Uncommon Blood Groups
  3. Atypical Antibodies and the Coombs Test

Chapter

Part II - chapters 8, 9, 5

Events and Submissions/Topic

Tutorial - week 4 content 

Week 5 Begin Date: 11 Aug 2025

Module/Topic

Principles of Serologic and Pretransfusion Compatibility Testing

Chapter

Part II – Chapters 10, 11

Events and Submissions/Topic

Tutorial: week 5 content

Vacation Week Begin Date: 18 Aug 2025

Module/Topic

Independent study week - an opportunity for self-directed learning and mid-unit revision.

Chapter

Events and Submissions/Topic

No lectures or tutorials 

Week 6 Begin Date: 25 Aug 2025

Module/Topic

Clinical and Non-clinical Conditions Associated with Transfusion Science

Chapter

Part III – Chapters 17 and 21

Events and Submissions/Topic

Tutorial- Week 6 content

Week 7 Begin Date: 01 Sep 2025

Module/Topic

Haemolytic Disease of the Fetus and the Newborn (HDFN)

Chapter

Part III – Chapter 20

Events and Submissions/Topic

Tutorial - Week 7 content 

Week 8 Begin Date: 08 Sep 2025

Module/Topic

Quality Assurance, Quality Control, Regulatory and Compliance Issues

Chapter

Part V – Chapters 25, 26, 28, 29

 

Events and Submissions/Topic

Tutorial - week 8 content

Week 9 Begin Date: 15 Sep 2025

Module/Topic

  1. The HLA System
  2. Laboratory Processes of Haemopoietic Stem Cell Transplant (HSCT)

Chapter

Part IV - Chapters 23 and 24

Part III - Chapter 19

 

Events and Submissions/Topic

Tutorial - week 9 content

Week 10 Begin Date: 22 Sep 2025

Module/Topic

Transfusion of Specific Blood Fractions

Chapter

Part I - Chapter 1 - pages 11-19

Part III - Chapter 16

Events and Submissions/Topic

Tutorial - week 10 content

Week 11 Begin Date: 29 Sep 2025

Module/Topic

  1. Automation in Transfusion Science
  2. Transfusion Science in Summary

Chapter

Part II – Chapter 12

Events and Submissions/Topic

Tutorial - week 11 content

Week 12 Begin Date: 06 Oct 2025

Module/Topic

Unit revision and exam preparation.

Chapter

Events and Submissions/Topic

On-line Q&A session

Review/Exam Week Begin Date: 13 Oct 2025

Module/Topic

Chapter

Events and Submissions/Topic

The End-of-unit exam will be scheduled in the CQUniversity examination period between 16/10/25 - 24/10/25. 

Exam Week Begin Date: 20 Oct 2025

Module/Topic

Chapter

Events and Submissions/Topic

The End-of-unit exam will be scheduled in the CQUniversity examination period between 16/10/25 - 24/10/25. 

Term Specific Information

This unit will be coordinated and delivered by Ms Roxzina (Roxina) Sharma; email: r.r.sharma@cqu.edu.au

Ms Sharma is a Brisbane based lecturer with over 32 years of industry experience (specialised haematology and transfusion science) and over 15 years of teaching experience in the field of transfusion science. 

PRE-REQUISITES

There are no perquisites for this unit however having completed LMED28003 Immunopathology 1 will be of support in completion of this unit.

TEXTBOOKS

Students have e-access to their prescribed textbook, additional reading resources and some of the supplementary textbooks via the eReading Lists on the Moodle page.

LECTURES

Pre-recorded lectures will be used throughout the term and will be available to students at least a week prior to the start of each lecture week. Students are to watch the lectures and complete the weekly study questions prior to the weekly tutorials.

TUTORIALS

Live tutorials will be delivered in all weeks except in residential school week. You must participate in both tutorials and pre-recorded lectures to obtain all necessary information for the unit. It is advisable to review the weekly lectures before each tutorial / quiz session. Weekly study questions are also provided to reinforce the knowledge you have gained from the lectures and to support your learning experience. Studies have shown that students who attend the tutorials and participate in discussions have higher rates of success (Karnik et al., 2020). 

RESIDENTIAL SCHOOL

Attendance to the Residential School is COMPULSORY for all students, further details are provided on your Moodle page. 

COMMUNICATION

Students are encouraged to use the Moodle Q&A for all communication purposes, except for those of a personal nature.  These can be emailed to me or A/P Genia Burchall. This will be monitored and responded to in a timely manner (within two business days). 

WORK EXPECTATION

There are no resubmissions of assessments in this unit. You must earn an overall grade of 50% to pass this unit. 

As per Australian educational standards, you are expected to commit 150 hours of engagement to your study of this unit. This is broken down as:

3 - 4 hours per week watching pre-recorded lectures and revising the content through study notes and weekly reading materials from the e-Reading Lists. 

2 - 3 hours per week completing the weekly study questions and other material on the unit's Moodle site.

1 - 2 hours per week attending the weekly tutorial and contributing to discussions and reflecting on your answers to the weekly study questions.

3 - 4 hours per week preparing your assessments or studying for end of term exams.

Karnik, A., Kishore, P., & Meraj, M. (2020). Examining the linkage between class attendance at university and academic performance in an International Branch Campus setting. Research in Comparative and International Education, 15(4), 371-390. https://doi.org/10.1177/1745499920958855

Assessment Tasks

1 Online Quiz(zes)

Assessment Title
Online Quiz(zes)

Task Description

These quizzes will cover key concepts, theories, and practical applications discussed in the lectures, tutorials and readings.

There will be three (3) separate online quizzes to assess your knowledge of the unit material. Each quiz will consist of multiple-choice questions, true/false statements, and short answer questions. 
The topics examined, weighting and the opening and closing dates are outlined below. Each quiz MUST BE completed during the specific times. In the absence of an approved extension, there will be no opportunity to complete the task after the assigned date. A 72-hour grace period does not apply for this assessment item. 
You are allowed ONE (1) attempt on each quiz. Once you start the quiz, you will have a set time to complete it. 
You MUST PASS this assessment. The minimum overall mark required to pass this assessment task is 50% of the cumulative marks of all three (3) quizzes (1-3). 

Level of GenAI use allowed:
Level 1: You must not use Al at any point during the assessment. You must demonstrate your core skills and knowledge.

QUIZ TOPICS ASSESSED WEIGHTING DATE QUIZ OPENS DATE QUIZ CLOSES
1 Weeks 1 - 4 12.5% Tuesday, week 5  Tuesday, week 5 
2 Weeks 5 - 6 25% Tuesday, week 7 Tuesday, week 7 
3 Weeks 7 - 9 12.5% Tuesday, week 11 Tuesday, week 11


Number of Quizzes

3


Frequency of Quizzes

Other


Assessment Due Date

See "Task Description" above.


Return Date to Students

Results and feedback will be released after completion of each quiz.


Weighting
50%

Minimum mark or grade
50% of the cumulative marks of all three (3) quizzes (1-3).

Assessment Criteria

These quizzes will evaluate the following.

Your understanding of key concepts.
Your ability to problem solve using key concepts.
Your retention of the course material throughout the term.


Referencing Style

Submission
Online

Submission Instructions
Submission point is in the unit's Moodle site. Time is Queensland's time - AEST.

Learning Outcomes Assessed
  • Critically discuss the production, labelling, storage and transportation of human blood products and their medical indications
  • Accurately interpret and report test results in transfusion and transplantation medicine
  • Critically evaluate quality control practices in transfusion and transplantation medicine
  • Critically evaluate the factors contributing to adverse outcomes and their effects in transfusion and transplantation medicine.

2 Practical Assessment

Assessment Title
Practical Assessment

Task Description

For Medical Scientists working in a Transfusion Laboratory, it is essential that laboratory techniques are performed and interpreted correctly each and every time. Failure to do so may lead to potentially fatal consequences. For this reason, demonstration of individual practical competence is vital. 

During the residential school you will complete the following. 

Part (A) Compulsory Practical Workbook (Pass/Fail): Students are required to transcribe all results and interpretations of each practical task in the relevant sections of this workbook. Completion of the workbook will evidence student engagement and understanding of the principles behind compatibility testing for safe transfusion practices. You must achieve a minimum of 80% marks to pass this assessment.

Part (B) Laboratory Practical Assessment (Pass/Fail): You will undertake an invigilated practical assessment in the last session of the residential school. You will be provided with a patient sample and a number of donor units to determine compatibility for safe transfusion outcomes. You will be required to accurately perform routine blood banking techniques to obtain valid results leading to the prevention of adverse transfusion outcomes. You must achieve a minimum of 80% marks to pass this assessment.

Students that are unable to achieve a pass grade in their first attempt will be offered one (1) reattempt on the same day at the residential school. 

Please note a 72-hour grace period does not apply to Part A and Part B of this assessment item. 

Level of GenAI use allowed:
Level 1: You must not use Al at any point during the assessment. You must demonstrate your core skills and knowledge.


Assessment Due Date

This assessment task must be completed during the mandatory residential schools.


Return Date to Students

Results and feedback will be provided after completion of Part A and Part B of this assessment task.


Weighting
Pass/Fail

Minimum mark or grade
80% of the total attainable marks for each part A and Part B.

Assessment Criteria

Part (A) Compulsory Practical Workbook (Pass/Fail): will be marked in class during the course of the Residential School at completion of each task. 

Students will be assessed on the following criteria.

Correct interpretation and explanation of results.
Demonstrate critical thinking ability in how you derived your conclusions from the clinical information provided.
Ability to define key concepts related to practical task performed during residential school.  

Part (B) Laboratory Practical Assessment (Pass/Fail):

You will be assessed on accurately performing the following criteria.

Correct patient and sample identification.
Correct interpretation of testing techniques.
Obtain and correctly transcribe valid results.
Correctly analyse results using critical thinking.
Determine compatibility of the donor units with a patient sample.
Explain how your results have achieved safe transfusion outcomes.
Students who fail the 1st attempt will be granted a second attempt. The second attempt will be conducted in the second half of the final day, prior to completion of the residential school session.


Referencing Style

Submission
Offline

Submission Instructions
To be handed to assessors for marking.

Learning Outcomes Assessed
  • Accurately interpret and report test results in transfusion and transplantation medicine
  • Demonstrate advanced testing skills in transfusion science including pre-transfusion, compatibility testing, antenatal / postnatal / neonatal screening and the testing for autoantibodies in accordance with quality control requirements for laboratory practices

Examination

Outline
Complete an invigilated examination

Date
During the examination period at a CQUniversity examination centre

Weighting
50%

Length
180 minutes

Minimum mark or grade
50%

Exam Conditions
Closed Book

Materials
Dictionary - non-electronic, concise, direct translation only (dictionary must not contain any notes or comments).
Academic Integrity Statement

As a CQUniversity student you are expected to act honestly in all aspects of your academic work.

Any assessable work undertaken or submitted for review or assessment must be your own work. Assessable work is any type of work you do to meet the assessment requirements in the unit, including draft work submitted for review and feedback and final work to be assessed.

When you use the ideas, words or data of others in your assessment, you must thoroughly and clearly acknowledge the source of this information by using the correct referencing style for your unit. Using others’ work without proper acknowledgement may be considered a form of intellectual dishonesty.

Participating honestly, respectfully, responsibly, and fairly in your university study ensures the CQUniversity qualification you earn will be valued as a true indication of your individual academic achievement and will continue to receive the respect and recognition it deserves.

As a student, you are responsible for reading and following CQUniversity’s policies, including the Student Academic Integrity Policy and Procedure. This policy sets out CQUniversity’s expectations of you to act with integrity, examples of academic integrity breaches to avoid, the processes used to address alleged breaches of academic integrity, and potential penalties.

What is a breach of academic integrity?

A breach of academic integrity includes but is not limited to plagiarism, self-plagiarism, collusion, cheating, contract cheating, and academic misconduct. The Student Academic Integrity Policy and Procedure defines what these terms mean and gives examples.

Why is academic integrity important?

A breach of academic integrity may result in one or more penalties, including suspension or even expulsion from the University. It can also have negative implications for student visas and future enrolment at CQUniversity or elsewhere. Students who engage in contract cheating also risk being blackmailed by contract cheating services.

Where can I get assistance?

For academic advice and guidance, the Academic Learning Centre (ALC) can support you in becoming confident in completing assessments with integrity and of high standard.

What can you do to act with integrity?