In Progress
Please note that this Unit Profile is still in progress. The content below is subject to change.Overview
Construction Measurement is the measurement and quantification for cost planning and documentation of building works and associated civil engineering works. In this unit, you will learn how to measure, quantify and cost construction work including civil engineering works associated with buildings. You will be referring to Australian Standard Method of Measurement (ASMM) of Building Works as a uniform basis for the measurement of building works. With the comprehensive knowledge of measurement, you will then gain in-depth knowledge of unit rate estimating and project pricing associated with the acquisition of materials and labour on building and construction sites. Having fundamental knowledge, you will then be directed to software to perform 2D and 3D electronic measurement and estimating associated with Computer Aided Design (CAD). You will be introduced to architectural and project coordination software to signify the integral part of cost planning in a construction project.
Details
Pre-requisites or Co-requisites
Prerequisite: Construction Technology
Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).
Offerings For Term 1 - 2025
Attendance Requirements
All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).
Recommended Student Time Commitment
Each 6-credit Postgraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.
Class Timetable
Assessment Overview
Assessment Grading
This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.
All University policies are available on the CQUniversity Policy site.
You may wish to view these policies:
- Grades and Results Policy
- Assessment Policy and Procedure (Higher Education Coursework)
- Review of Grade Procedure
- Student Academic Integrity Policy and Procedure
- Monitoring Academic Progress (MAP) Policy and Procedure - Domestic Students
- Monitoring Academic Progress (MAP) Policy and Procedure - International Students
- Student Refund and Credit Balance Policy and Procedure
- Student Feedback - Compliments and Complaints Policy and Procedure
- Information and Communications Technology Acceptable Use Policy and Procedure
This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.
Feedback, Recommendations and Responses
Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.
Feedback from Student unit teaching evaluations
The student feedback noted that the lecturer needed to be more mindful of student diversity.
Teaching staff will be advised to be mindful of student diversity and international building construction backgrounds in their home country.
- Critically analyse and describe the standard method of measurement for various building components
- Evaluate construction measurement and estimate software to select the most appropriate package for a given construction type
- Reflect, critically evaluate and integrate technology and measurement to cost construction projects.
Alignment of Assessment Tasks to Learning Outcomes
| Assessment Tasks | Learning Outcomes | ||
|---|---|---|---|
| 1 | 2 | 3 | |
| 1 - Written Assessment - 25% | |||
| 2 - Laboratory/Practical - 40% | |||
| 3 - Case Study - 35% | |||
Alignment of Graduate Attributes to Learning Outcomes
| Graduate Attributes | Learning Outcomes | ||
|---|---|---|---|
| 1 | 2 | 3 | |
| 1 - Knowledge | |||
| 2 - Communication | |||
| 3 - Cognitive, technical and creative skills | |||
| 4 - Research | |||
| 5 - Self-management | |||
| 6 - Ethical and Professional Responsibility | |||
| 7 - Leadership | |||
| 8 - Aboriginal and Torres Strait Islander Cultures | |||
Alignment of Assessment Tasks to Graduate Attributes
| Assessment Tasks | Graduate Attributes | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| 1 - Written Assessment - 25% | ||||||||
| 2 - Laboratory/Practical - 40% | ||||||||
| 3 - Case Study - 35% | ||||||||