CQUniversity Unit Profile

In Progress

Please note that this Unit Profile is still in progress. The content below is subject to change.
BLAR13044 Building Systems and Services 2
Building Systems and Services 2
Save or Print as PDF
All details in this unit profile for BLAR13044 have been officially approved by CQUniversity and represent a learning partnership between the University and you (our student).
The information will not be changed unless absolutely necessary and any change will be clearly indicated by an approved correction included in the profile.
General Information

Overview

The unit provides an introduction to: energy management systems and strategies for non-residential buildings; ventilation Strategies-principles of air-conditioning and ventilation systems including an understanding of flow analysis for natural ventilation; plant and ducting requirements for air conditioning installations; fire services for commercial class buildings under the Building Code of Australia; communications and security systems in non-residential buildings; storage requirements for fuels such as gas and diesel; transportation systems including escalators and moving walk-ways, lifts (electric and electro-hydraulic) including safety and regulation issues; and building services maintenance and management strategies and procedures. Students will develop an understanding of energy, ventilation and fire safety strategies for commercial class buildings (as designated in the Building Code of Australia). In addition students will be introduced to communications, transportation and services maintenance requirements for buildings. N.B. Students should have completed introductory studies in building services to ensure an adequate level of entry knowledge.

Details

Career Level: Undergraduate
Unit Level: Level 3
Credit Points: 6
Student Contribution Band: 8
Fraction of Full-Time Student Load: 0.125

Pre-requisites or Co-requisites

Prereq: BLAR11043 or [BLAR12001 & BLAR12005]

Important note: Students enrolled in a subsequent unit who failed their pre-requisite unit, should drop the subsequent unit before the census date or within 10 working days of Fail grade notification. Students who do not drop the unit in this timeframe cannot later drop the unit without academic and financial liability. See details in the Assessment Policy and Procedure (Higher Education Coursework).

Offerings For Term 1 - 2025

Online

Attendance Requirements

All on-campus students are expected to attend scheduled classes - in some units, these classes are identified as a mandatory (pass/fail) component and attendance is compulsory. International students, on a student visa, must maintain a full time study load and meet both attendance and academic progress requirements in each study period (satisfactory attendance for International students is defined as maintaining at least an 80% attendance record).

Website

This unit has a website, within the Moodle system, which is available two weeks before the start of term. It is important that you visit your Moodle site throughout the term. Please visit Moodle for more information.

Class and Assessment Overview

Recommended Student Time Commitment

Each 6-credit Undergraduate unit at CQUniversity requires an overall time commitment of an average of 12.5 hours of study per week, making a total of 150 hours for the unit.

Class Timetable

Regional Campuses
Bundaberg, Cairns, Emerald, Gladstone, Mackay, Rockhampton, Townsville
Metropolitan Campuses
Adelaide, Brisbane, Melbourne, Perth, Sydney

Assessment Overview

Assessment Grading

This is a graded unit: your overall grade will be calculated from the marks or grades for each assessment task, based on the relative weightings shown in the table above. You must obtain an overall mark for the unit of at least 50%, or an overall grade of 'pass' in order to pass the unit. If any 'pass/fail' tasks are shown in the table above they must also be completed successfully ('pass' grade). You must also meet any minimum mark requirements specified for a particular assessment task, as detailed in the 'assessment task' section (note that in some instances, the minimum mark for a task may be greater than 50%). Consult the University's Grades and Results Policy for more details of interim results and final grades.

CQUniversity Policies

All University policies are available on the CQUniversity Policy site.

You may wish to view these policies:


This list is not an exhaustive list of all University policies. The full list of University policies are available on the CQUniversity Policy site.

Previous Student Feedback

Feedback, Recommendations and Responses

Every unit is reviewed for enhancement each year. At the most recent review, the following staff and student feedback items were identified and recommendations were made.

Feedback from Student feedback both formal and informal

Feedback

The minor assessments are only worth a small % but have a hurdle you must pass. There are too many assignments, most units only have 3.

Recommendation

The unit will be amended to contain only 3 written assessments with only the third having a hurdle.

Unit Learning Outcomes
On successful completion of this unit, you will be able to:
  1. discuss the concept of Energy Management, the associated economic assessment and the importance of Building Energy Management Systems (BEMS)
  2. understand the principles of air conditioning and ventilation systems, flow analysis for natural ventilation and the plant and ducting requirements for air conditioning installations
  3. discuss fire detection and alarm systems and fire suppression systems with respect to the relevant codes and standards
  4. discuss the basic elements of a communication system and the basic elements of a security system
  5. discuss the storage and handling of flammable and combustible liquids and Liquefied Petroleum Gas (LPG)
  6. discuss the types, functions and regulations concerning lifts, escalators, and moving walkways
  7. discuss the importance of maintenance in terms of function, procedures and operations
Alignment of Learning Outcomes, Assessment and Graduate Attributes
N/A Level
Introductory Level
Intermediate Level
Graduate Level
Professional Level
Advanced Level

Alignment of Assessment Tasks to Learning Outcomes

Assessment Tasks Learning Outcomes
1 2 3 4 5 6 7
1 - Written Assessment - 5%
2 - Written Assessment - 20%
3 - Written Assessment - 5%
4 - Written Assessment - 30%
5 - Written Assessment - 5%
6 - Written Assessment - 35%

Alignment of Graduate Attributes to Learning Outcomes

Graduate Attributes Learning Outcomes
1 2 3 4 5 6 7
1 - Communication
2 - Problem Solving
3 - Critical Thinking
4 - Information Literacy
5 - Team Work
6 - Information Technology Competence
7 - Cross Cultural Competence
8 - Ethical practice
9 - Social Innovation
10 - Aboriginal and Torres Strait Islander Cultures

Alignment of Assessment Tasks to Graduate Attributes

Assessment Tasks Graduate Attributes
1 2 3 4 5 6 7 8 9 10
1 - Written Assessment - 5%
2 - Written Assessment - 20%
3 - Written Assessment - 5%
4 - Written Assessment - 30%
5 - Written Assessment - 5%
6 - Written Assessment - 35%
Textbooks and Resources

Information for Textbooks and Resources has not been released yet.

This information will be available on Monday 17 February 2025
Academic Integrity Statement

Information for Academic Integrity Statement has not been released yet.

This unit profile has not yet been finalised.